
How to Move a Mattress Without Damaging It
Elizabeth Feins
October 22, 2026
A mattress looks like the easiest thing in the house to move. It has no glass, no drawers, and nothing to disassemble. Then you try to carry a queen down a staircase and discover that it weighs 80 to 150 pounds, has nothing to grip, bends in the middle, and catches on every railing.
Mattresses are also easy to damage in ways you do not notice until later. A foam mattress folded too long can crease permanently. A coil mattress laid flat under a stack of boxes can lose its support. A mattress stored in a damp garage can grow mildew in a single Indiana summer. And most manufacturers will not honor a warranty for any of those.
Here is how to move a mattress properly, whether you are carrying it yourself or having a crew handle it.
What You Need to Move a Mattress
A mattress bag. This is the most important item on the list. A thick plastic bag sized to your mattress keeps out dirt, moisture, and pests, and gives you something to grip. You can find them on our packing supplies page or at any hardware store. Buy the bag for the actual size, because a king will not fit into a queen bag.
Packing tape. To seal the bag and, as a trick, to make handles (more below).
Ratchet straps or rope. To secure the mattress against the truck wall so it does not slide or fall.
A furniture dolly or hand truck. Optional, but it makes long hallways and driveways much easier.
A helper. Moving a queen or king alone is possible but rarely worth the risk.
Step 1: Measure the Mattress and the Route
Before you lift anything, measure the mattress and every doorway, hallway, and stairwell it has to pass through. A standard queen is about 60 by 80 inches and a king about 76 by 80 inches, and thickness ranges from 8 to over 14 inches. Tight turns at the top of stairs are where most moves get stuck. If a king will not clear a turn on its side, it will not clear it any other way either, so find out before you are holding it.
Step 2: Strip, Clean, and Inspect
Remove all bedding, pillows, and the mattress protector. Vacuum the surface and let the mattress air out for a few hours. This is also your chance to check for stains, tears, or pests. If you are moving out of an apartment building, a careful look along the seams for bed bugs is worth the two minutes. You do not want to bring anything with you.
Step 3: Bag and Seal the Mattress
Stand the mattress on its side, slide the bag down over it like a pillowcase, then lay it down and pull the bag the rest of the way. Fold the open end over and tape it closed. Then run tape around the middle and ends to tighten the plastic.
Here is a trick professionals use: tape a few loops on each long side to make grip handles. They give you something to hold that is not the mattress itself, and they make carrying much more controlled.
Step 4: Carry It on Its Side
Never carry a mattress flat. It will fold, sag, and drag on the floor. Turn it on its long edge, with one person at each end, and lift just high enough to clear the floor. The person in front guides the way and calls out turns, steps, and doorframes.
On stairs, the person below takes most of the weight and goes down first, facing the mattress. Move one step at a time. If the mattress starts to slide, let it rest against the wall rather than trying to catch it.
How Do You Move a Mattress by Yourself?
If you have no helper, use a hand truck or dolly. Stand the bagged mattress on its edge, tip it onto the dolly, strap it in place, and wheel it. For short distances on a flat floor, you can also slide a bagged mattress on its edge, but never drag an unbagged one, because the fabric will tear.
On stairs alone, slide the mattress down on its side with the bag as protection, controlling it from below. We do not recommend carrying a king up stairs by yourself under any circumstances. That is how people get hurt.
Step 5: Load It Correctly for Its Type
This is where spring and foam mattresses differ, and the difference matters. U-Haul’s mattress moving tips follow the same logic.
Innerspring and hybrid mattresses should travel standing on their side, against the wall of the truck, and strapped tight. This keeps the coils from being compressed and prevents anything from being stacked on top.
Memory foam and latex mattresses are heavy and floppy. They do best laid flat on a clean, supported surface with nothing heavy stacked on top. If they must stand on edge, they need to be fully supported along their length so they do not fold.
Box springs and foundations can go on their side next to the mattress, or flat with light items on top. Box springs are mostly air and wood, so treat them like a piece of furniture rather than a pillow.
Do not fold a mattress unless it is specifically designed to fold, and never fold a hybrid or innerspring. Bending coils can break the internal structure.
How Do You Move a Mattress Without a Truck?
A pickup truck works well if the mattress is bagged and strapped down in several places. A minivan or large SUV can handle a twin or full with the seats folded. Strapping a mattress to the roof of a car is the method we see go wrong most often. Highway wind gets under it, the straps loosen, and the mattress either damages your roof or ends up on the road. If you have no truck, renting one for a few hours or including the mattress in a moving quote is usually safer and not much more expensive.
What Is the Cheapest Way to Move a Mattress?
If you have a helper and access to a pickup, the cheapest way is to bag it yourself and drive it. If you are moving the rest of your home anyway, the mattress adds very little to the cost of hiring movers, because it is one of the fastest items for a crew to load. Our pricing page shows how hourly rates work.
Can You Re-Roll or Re-Box a Boxed Mattress?
Bed-in-a-box mattresses arrive compressed, but once they expand, you cannot reliably get them back into that shape at home. Vacuum-compressing a foam mattress may work for a short move, but it can damage the foam and often voids the warranty. Innerspring and hybrid boxed mattresses should not be compressed again at all. Move them like any other mattress.
How Long Can a Mattress Stay Rolled Up in a Box?
If you have a new mattress still in its box, follow the manufacturer’s guidance. Many recommend unboxing within a few weeks to a few months, because foam left compressed too long may not fully recover. After unboxing, most mattresses need 24 to 72 hours to reach full size and firmness. The Sleep Foundation has good general guidance on mattress care and expansion.
Step 6: Unload and Let It Settle
At the new home, carry it in the same way, on its side. Remove the bag as soon as it is indoors, especially in summer. Trapped moisture can lead to mildew. Let the mattress rest flat for a few hours before making the bed, especially foam mattresses that may have shifted in transit.
How to Store a Mattress
If your move includes time in storage, how you store a mattress matters as much as how you move it.
Store it flat or on its side, not folded. Ideally lay it flat on a clean surface with nothing heavy on top. If space forces it on edge, keep it fully supported.
Use a breathable cover for long-term storage. A sealed plastic bag works for moving day, but for months of storage, a breathable cover lets moisture escape.
Choose climate control. Indiana summers are humid and winters are cold. Temperature swings and humidity can cause mold, mildew, and foam breakdown. A climate-controlled storage unit protects mattresses far better than a garage, shed, or basement. If you are not sure how much space you need, our guide to what size storage unit you need helps.
What to Do With an Old Mattress
Moving is a good time to replace a worn-out mattress. Many curbside trash programs restrict mattress pickup, so check your city’s rules before leaving one at the curb. Our junk removal service can take it away on moving day so you do not have to haul it twice.
When to Let Movers Handle It
Mattresses are part of every residential move we do, along with bed frames, headboards, and adjustable bases, which have motors and wiring that need careful handling. If you want help, our packing services include bagging mattresses and protecting furniture. For heavier and more delicate items, see our guides to moving specialty items and how to move a piano. The Home Depot’s mattress guide is another good reference if you are going the DIY route.
Moving within the Indianapolis area? Our local moving crews handle mattresses every day. Request a free quote and let us do the heavy lifting.
Frequently Asked Questions About Moving a Mattress
Should a mattress be moved flat or on its side? Innerspring and hybrid mattresses should travel on their side and strapped to the truck wall. Memory foam and latex mattresses do best flat and supported, with nothing heavy stacked on top.
Can you fold a mattress to move it? Only if the manufacturer designed it to fold. Folding an innerspring or hybrid mattress can break coils, and folding foam for long periods can leave permanent creases.
Do I need a mattress bag? Yes. A mattress bag protects against dirt, moisture, tears, and pests, and gives you something to grip. It is the cheapest insurance you can buy for your mattress.
How many people does it take to move a mattress? Two people for a full, queen, or king. One person can move a twin, or a larger mattress on a dolly over a flat floor.
Can I put a mattress on the roof of my car? We do not recommend it. Wind can loosen straps and damage both the mattress and your car. A pickup, rental truck, or movers are safer.